Impossible set the address of the RenderPal V2 Server

If you have some new ideas or any other kind of suggestions, post them here!
Post Reply
anion
Posts: 32
Joined: 26 Feb 2014, 14:17

Impossible set the address of the RenderPal V2 Server

Post by anion » 05 Dec 2017, 09:01

I want to set the address of the RenderPal V2 Server

Code: Select all

"RenderPalCl.exe" -heartbeat:"192.168.1.4" -silent -quit
address is not recorded in "RenderPalCl.cfg"
If not use "-silent -quit" everything works

Useful command-line switches:

Code: Select all

This switch allows you to set the address of the RenderPal V2 Server to use for heartbeat sending. The syntax is as
follows:
    /heartbeat:<server>
    /heartbeat:”192.168.0.100”
<server> denotes the address of the RenderPal V2 Server. You can also specify a port (using the address:port syntax) if it differs from the default one.
RenderPal V2 2.15.0.2002
--
sorry for the translation

Post Reply