- Code: Select all
"RenderPalCl.exe" -heartbeat:"192.168.1.4" -silent -quit
address is not recorded in "RenderPalCl.cfg"
If not use "-silent -quit" everything works
Useful command-line switches:
- Code: Select all
This switch allows you to set the address of the RenderPal V2 Server to use for heartbeat sending. The syntax is as
follows:
/heartbeat:<server>
/heartbeat:”192.168.0.100”
<server> denotes the address of the RenderPal V2 Server. You can also specify a port (using the address:port syntax) if it differs from the default one.
RenderPal V2 2.15.0.2002